Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
BALL BEARING DRIVE NUT
price: $27.10
part num: 42
Replacement Draw Stud 3/8in. x 1-5/8in.

EG2 ENGRAVER FOR PANEL PRO
price: $1,314.50
part num: 1-0072-0
Buller’s EG2 brings a new level of precision engraving to the Panel Pro. It has a graduated depth of cut nose for easy, consistent setups and a replaceable nose. The toploading design ensures accurate, concentric rotation. This engraver comes with the added benefit of engraving cutters that can be exchanged in place so that the depth setting doesn’t have to be disturbed or readjusted. Ball bearing motor. includes: EG2 assembly and one 0.010 tip width cutter

INTERNATIONAL SHIPPING CRATE
price: $247.50
part num: 1-0079-1
International Shipping Crate for 5624A Panel Pro.

MEASURE PRO FOR PANEL PRO
price: $984.50
part num: 1-0112-0
This Panel Pro accessory measures individual elements such as lines, circles, and curves and saves them as a dxf file for editing in CAD programs. As a coordinate measuring device, its primary focus is the panel perimeter, but mouting holes, instrument holes and other panel features can be measured as well.

System includes:

TP1 Touch Probe - a switch that opens when the ruby probe tip makes contact with a edge or surface. It triggers +/- X axis, +/- Y axis, - Z axis.

Measuring software - part of the AvCAM software included with the Panel Pro 5925


ROUTER W/ PORTER CABLE 892S INSTALLED
price: $381.70
part num: 1-0100-1
Porter Cable 892 Router. The Porter Cable collet bore is checked and reground if necessary. The Collet Adapter is installed and clocked for maximum accuracy.

The Porter Cable router is the standard router shipping with the Panel Pro™ and features precision with economy and maintainability.

  • 110Vac
  • 2 1/4 HP
  • variable speed regulated from 13 to 23000 RPM
  • Porter Cable to ER11 collet adapter
  • locally available, parts available locally
  • Industry standard ER11 collets are available from 1/16 to 1/4"



PANEL PRO MODEL 5925
price: $19,525.00
part num: 1-0300-00
Reduce the time it takes to cut out a panel with Buller Enterprises' Panel Pro 5925, a computer-controlled router that takes cutting time down from a day to less than a couple of hours. This machine is optimized for cutting 1/8" thick aluminum sheet metal but is capable of handling other thicknesses as well as Plexiglas and wood. The Panel Pro cuts a wide range of sizes with accuracy to approximately 0.0002" and it has the ability to create corners and micro stop countersinks. All that's required is a Pentium computer; the Panel Pro's included AvCAM software is compatible with .dxf files created by AutoCAD.
  • Perfect for cutting 1/8" thick aluminum sheet metal but capable of cutting aluminum as thick as 1/2" as well as other materials such as Plexiglas and wood (however, there is no vacuum system)
  • Cut a wide range of sizes with a width travel (X axis) of 59", height travel (y axis) of 25" and up and down travel (Z axis) of 3.125" along with the added ability to make one or more micro stop countersinks and other operations
  • Fast cutting times - requires approximately 1 hour, 20 minutes to complete the cutting necessary to create a 4' wide King Air 350 panel with an average cutting speed of 12 - 15 inches per minute (cutting speed depends on the material and desired finish)
  • The included AvCAM operating software translates drafting files into finished work and AvCAM can use the Z axis of a dxf file (if no Z coordinate is supplied as in 2D CAD, the Z depth defaults to a Z cutting depth entered by the user)
  • Provides accuracy within about 0.0002"; each Panel Pro 5925 uses a table that corrects lead screw errors and hole diameters can be held to better than .002" with very light burr
  • Equipped with home switches for repeatable absolute zero in X, Y, and Z as well as hard stops on the X and Y axes so that the X to Y square can be easily checked and reset
  • For square corners, the minimum corner radius is dependent on the end mill used; for 1/8", the minimum radius is 0.0625"
  • Compatible with Pentium class computers with a Windows XP or Windows 7 operating system, 32 or 64 bit; requires a standard serial or USB port with adapter to connect with the SC3 Controller
  • Requires about 4' x 6' of room for operation

Includes:
  • Panel Pro 5925 machine tool
  • SC3 controller; interconnect cables
  • Milwaukee 3-1/2 hp production quality variable/regulated speed router with collet adapter to use industry standard ER11 collets
  • 1/8", 3/16", and 1/4" collets
  • AvCAM version 11 software
  • Easy Cad 2D computer-aided drafting software
  • Buller's aircraft instrument panel and instrument drawing library
  • coolant system with 1 gallon of coolant
  • starter supply of high-strength carbide end mills
  • hand tools (for operating purposes)
  • a 2" dial indicator to check the Z level of critical areas
  • pen plotter adapter to draw out panels or parts in full size
  • USB to serial adapter for connection with PC

Shipping weight:
435 lbs

Dimensions:
48" x 24" x 73"

Move resolution:
0.0001968"

3/32" SGL END MILL/ 1/8" SHANK
price: $20.71
part num: 159-280327
3/32x1/8 SINGLE END MILL END FOR PANEL PRO/4824A

ENGRAVER TIP/.005" CUTTING TIP
price: $16.45
part num: 15ABAL.005
Engraver Tip: .005" Cutting Tip for the Panel Pro.

ENGRAVER TIP/.010" CUTTING TIP
price: $16.45
part num: 15ABAL.010
Engraver Tip: .010" Cutting Tip for the Panel Pro.


ENGRAVER TIP/.015" CUTTING TIP
price: $16.45
part num: 15ABAL.015
Engraver Tip: .015" Cutting Tip for the Panel Pro.

PUNCH SYSTEM/15 PIN D CONNECTO
price: $624.37
part num: 231
Cut-out and mounting slots are punched in one operation. Drill only one 7/16" (11.1 mm) pilot hole. Fast, accurate panel punching with no sawing or filing required. Universal size punches for front or back mount of TRW Cinch and ITT Cannon-type or equivalent connectors in 9, 15, 25, 37 or 50-pin configurations.
  • Operation: Manual with a wrench; Quick Draw® and Quick Draw 90® hydraulic drivers, Battery Driver, Ram and Pump hydraulic drivers.
  • Capacity: 16 gauge (1.5 mm) mild steel; 10 gauge (3.5 mm) aluminum.

DRAW STUD FOR HOLE PUNCH
price: $51.37
part num: 304AVBB
DRAW STUD FOR HOLE PUNCH

ENDMILL 3/32x1/8x3/8 2 FLT SE CC CARBIDE UNCOATED
price: $18.65
part num: 32063
ENDMILL 3/32" diameter, 1/8" shank, 3/8 length, 2 flute, SE CC CARBIDE UNCOATED

KWIK STEPPER DRILL BIT
price: $56.63
part num: 34403
Drills (12) holes sizes from 3/16" through 7/8" in increments of 1/16".
  • Unique tip design penetrates metal faster.
  • Double flute construction takes less pressure... it does the work for you.
  • Ruggedly built for maximum durability and long life.
  • Manufactured in the USA by GREENLEE.
  • Mimimum Chuck Size: 3/8".


BALL BEARING W/ 3/8 DRIVE NUT
price: $50.61
part num: 34733

PORTER CABLE ROUTER FOR 4824A
price: $247.50
part num: 690LRS
Porter Cable Router for Panel Pro 4824A.

GAGE FOR 1/8 END MILL
price: $3.84
part num: 7-0048-0
GAGE FOR 1/8 END MILL

KING AIR PANEL SPACER KIT
price: $54.95
part num: 7-0080-0
King Air Panel Spacer Kit for Panel Pro 5624A.


DIAMOND TIP ENGRAVER FOR PANEL PRO
price: $141.90
part num: 7-0090-0
The Diamond Engraver is a drag type, non-rotating engraver. It works best on bare metal (brass, aluminum, stainless steel) and anodized aluminum.

1" ROUND HOLE PUNCH
price: $59.99
part num: 730BB-1

The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works:

  • (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched.
  • (2) Drill proper size pilot hole in the center.
  • (3) Put drive screw through die and pilot hole.
  • (4) Thread on punch until both die and punch are ight against metal.
  • (5) Line up center lines of the hole with marks on outside of the die.
  • (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched.
  • (7) Remove punch from drive screw and the metal halves will fall out.
  • NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench.


1 1/8" HOLE PUNCH
price: $61.62
part num: 730BB1-1/8
Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch mild steel, aluminum, fiberglass and plastic. Hole Sizes/Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. Pg Sizes: European standard pipe sizes. ISO Sizes: International Standards Organization pipe sizes. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.

Round Standard Metal Punch Units are complete units consisting of punch, die and draw stud.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.



Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »