Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
SPEAKER AMPLIFIER
price: $821.70
part num: AA23-001
The AA23-001 is a versatile speaker amplifier that can be used to convert balanced 600 ohm line, 600 ohm headset, or carbon-equivalent microphone levels to speaker outputs. The interface to the AA23 is fully floating (transformer coupled), permitting complex and long distance interconnects and providing outstanding rejection of ground loop signals. The speaker output is ground referenced.
  • Accepts Mic., 600 ohm line and H/S inputs, with floating interface
  • Muted or partially muted outputs
  • Dual PTT key logic inputs and outputs
  • Selectable frequency response, Voice or Music
  • Adjustable gain


CUSTOM SWITCH PANEL/NVG
price: $2,172.50
part num: AA30-045
Expansion Panel is a Dzus-mounted transceiver or radio receiver expansion panel.

CUSTOM SWITCH PANEL
price: $2,173.60
part num: AA30-046
Expansion Panel is a Dzus-mounted transceiver or radio receiver expansion panel.

ICS MODE SELECTOR
price: $1,131.90
part num: AA31-002
Mode selector for organizing multiple ICS circuits. Visual LED annunciation of mode status. External annunciation - 100 mA max @ 14/28 VDC. Any ISO mode activates Amber Status LED. ALL Common activates Green Status LED. Two rear CALL annunciators with separate inputs. Modes: ALL ISO, REAR ISO, PILOT ISO, ALL COMMON. 28 VDC backlighting.
AA31-002 provides active grounds for external annunciation.
Weight: 0.5 lb / 0.225 kg
Power: 0.2 A / 28 VDC
Install Kit: AA31-IKC (Crimp)

UNIVERSAL RADIO INTERFACE
price: $427.90
part num: AA34-200
The AA34 Universal Radio Interface will handle the interface and switching requirements of mobile or CB radio systems when integrated into an aircraft audio system. The AA34 unit provides microphone excitation; relay keying, and sidetone generation, all fully isolated from airframe ground.
  • Mobile/FM radio interface
  • Provides floating key lines
  • Internal RX and Sidetone amplifier
  • Provides floating audio lines in and out
  • Internal mic exciter with adjustable output
  • Internally selectable functions and levels


Input power:
+13.8 Vdc ±10% or 27.5 Vdc ±10% 160 mA

Input signals:
Mic: 250 mVrms @ 150 ohm ±10%
Audio: 2.5 Vrms @ 600 ohm ±10%

Output signals:
Mic: Approx. 225 mVrms max into 150 ohm
Audio: 200 mW into 150 or 600 ohm nominal

Height:
1.30 inches (33.0mm) max

Depth:
2.71 inches (68.8mm) max including connector

Width:
4.54 inches (115.3mm) max

Weight:
0.63 lb (285g) max

Mounting:
Bulkhead mount with four 10-32 screws

Material/Finish:
5052-H32 brushed aluminum chassis cover with conversion finish

Connector:
25 pin male D-sub

Temperature:
-20°C to +55°C (operating)
-55°C to +85°C (survival)

Altitude:
15,000 ft (tested to 25,000 ft)

Humidity:
95% non-condensing

Shock:
6g (any axis)

ICS MODE CONTROLLER / CUSTOM
price: $2,588.30
part num: AA31-904
Mode selector for organizing multiple ICS circuits.

ICS MODE CONTROLLER / CUSTOM
price: $2,308.35
part num: AA31-9XX
Mode selector for organizing multiple ICS circuits.

AUDIO MIXER PANEL / TAWS
price: $982.30
part num: AA35-400
The AA35-400 Audio Mixer Panel is a three channel summing amplifier, for TAWS applications, with independent level control for each input. It can be used as an expansion for existing controllers.
  • Remote mount audio mixer/ summing amplifier for TAWS applications
  • Provides signal combinations of up to three in/three out or three in/one composite out
  • 2.5 Vrms or 7 Vrms input level
  • Output 7.7 Vrms or 100 mW/600 ohm max


AUDIO MIXER PANEL/SONAR INTERFACE
price: $2,173.60
part num: AA35-007N
The AA35-007N Audio Mixer Panel is a six channel amplifier with independent level control for each channel. It can be used as an expansion panel for existing controllers.
  • NVIS compatible

Input voltage:
27.5 Vd (nominal)

Input current:
275 mA (nominal)

Lighting:
80 mA @ 27.5 Vdc

Impedance:
4.0 k ±10%

Audio level:
2.5 or 7 Vrms. Selectable by DIP switch

Circuitry type:
Differential input for high common mode noise rejection.

Coupling:
<-40dB input to input crosstalk

Rated level:
7.7 Vrms to 100 mW into 600
1.3 Vrms or 200 mW into 8

Impedance:
20 max

Frequency response:
<3 dB from 350 to 6000 Hz

Distortion:
<10% THD @ rated power output

Circuitry type:
Balanced output for high common mode noise rejection

Coupling:
<-50 dB input to output Crosstalk

Audio noise level without signal:
>60 dB down from rated output level

Output regulation at 400% and 75% of rated load:
<10% distortion / 3 dB max. of rated output power

Height:
1.12" (28.4 mm)

Depth:
5.68" (144.27 mm) overall
4.78" (121.14 mm) behind panel

Width (max):
5.75" (146.05 mm) faceplate

Width (box):
4.90" (124.46 mm) behind panel

Weight:
1.1 lb (500 g)

Mounting:
Dzus rail

Faceplate:
Laser etched acrylic back-lit panel

Material/Finish:
Chassis and cover 5052-H32 brushed aluminum with chromate conversion finish

Temperature:
Operating: -45°C to +70°C
Survival: -55°C to +85°C

Altitude:
35,000 ft. max

Humidity:
95%

Vibration/Shock:
DO-160C, Cat. N/B/M

ALERTING SYSTEM/3 TONE
price: $832.70
part num: AA37-212
The AA37 series are dual channel Alerting Systems that provide two to three level alerting.

The AA37 Alerting Systems are compact, remote mounted units. All outputs are fully isolated to allow installation in dual audio controller systems. Trigger inputs can be active low or active high dependent on the model, allowing easy interface to common aircraft systems. The tone and rate of the alerts are adjustable to allow tailoring of the tones to ensure they do not interfere with existing airframe warning functions.
  • Dual Channel, 3 level alerting
  • Provides alerting for AA94/AMS42/44
  • Floating outputs, 150-600 ohm loads
  • Low level triggers




HEADSET ADAPTER LO TO HI Z
price: $557.70
part num: AA39-187
1 mic input - 5 ohms / 0.250 mV.
1 phones input - 600 ohm / 7.7 V.
1 mic output - 0.25 V into 150 ohms.
1 phones output - 0.9 V into 8 ohms.
Powered by mic connection.
AA39-287 provides adaptation for two headsets.
Weight: 0.35 lb / 0.16 kg
Power: N/A; via mic bias circuit
Install Kit: AA35-IKC-1 (Crimp)
1 mic input - 5 ohms / 0.250 mV.
1 phones input - 600 ohm / 7.7 V.
1 mic output - 0.25 V into 150 ohms.
1 phones output - 0.9 V into 8 ohms.
Powered by mic connection.
AA39-287 provides adaptation for two headsets.
Weight: 0.35 lb / 0.16 kg
Power: N/A; via mic bias circuit
Install Kit: AA35-IKC-1 (Crimp)

D37PV-IKC INSTALL KIT
price: $78.10
part num: D37PV-IKC
D37PV-IKC INSTALL KIT

PTA12-100 UPGRADED W/TEXT MESSAGING OPTION
price: $2,960.95
part num: PTA12-100M

SERVICE MANUAL FOR NTX403 UHF
price: $154.00
part num: SM-64
Service Manual for NTX403 UHF.

Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »