Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
CUSTOM SWITCH PANEL
price: $2,173.60
part num: AA30-042
Single channel audio controller expansion panel. 3 receiver inputs / channel. 3 transmit keylines / channel. Panel lighting 28 VDC (normal).
Weight: 1.0 lb / 0.45 kg



AUDIO MIXER PANEL
price: $1,579.60
part num: AA35-001
The AA35-001 Audio Mixer Panel is a six channel summing amplifier with independent level control for each input. It can be used as an expansion panel for existing audio systems.
  • Dzus mount audio mixer/ summing amplifier panel
  • Provides signal combinations of up to six in/six out or six in/one composite out
  • 2.5 Vrms or 7 Vrms input level
  • Output 7.7 Vrms or 100 mW/600 ohm max
  • Panel Lighting 28 Vdc (normal)

Input voltage:
27.5 Vd (nominal)

Input current:
275 mA (nominal)

Lighting:
80 mA @ 27.5 Vdc

Channels:
6 independent channels

Impedance:
4.0 k ±10%

Audio level:
2.5 or 7 Vrms. Selectable by DIP switch

Circuitry type:
Differential input for high common mode noise rejection.

Coupling:
<-40dB input to input crosstalk

Rated level:
7.7 Vrms to 100 mW into 600
1.3 Vrms or 200 mW into 8

Channels:
6 independent channels plus 1 composite output

Impedance:
20 max

Frequency response:
<3 dB from 350 to 6000 Hz

Distortion:
<10% THD @ rated power output

Circuitry type:
Balanced output for high common mode noise rejection

Coupling:
<-50 dB input to output Crosstalk

Audio noise level without signal:
>60 dB down from rated output level

Output regulation at 400% and 75% of rated load:
<10% distortion / 3 dB max. of rated output power

Height:
1.12" (28.4 mm)

Depth:
5.68" (144.27 mm) overall
4.78" (121.14 mm) behind panel

Width (max):
5.75" (146.05 mm) faceplate

Width (box):
4.90" (124.46 mm) behind panel

Weight:
1.1 lb (500 g)

Mounting:
Dzus rail

Faceplate:
Laser etched acrylic back-lit panel

Material/Finish:
Chassis and cover 5052-H32 brushed aluminum with chromate conversion finish

Temperature:
Operating: -45°C to +70°C
Survival: -55°C to +85°C

Altitude:
35,000 ft. max

Humidity:
95%

Vibration/Shock:
DO-160C, Cat. N/B/M

SINGLE CHANNEL AUDIO CONTROLLER/5 TRANSCEIVER/6 RECEIVE/WITH ALERTS
price: $3,458.40
part num: AA95-728
Control all aircraft audio with AEM's AA95-728 single channel audio controller. This model has been customized to the user's specific requirements and is equipped with selections for transmit and receive audio, LIVE, KEYED, or VOX intercom, interface for a hand mic, and pilot isolation/emergency operations. A rotary switch controls the transmit and PA functions while the receive audio, ICS operations, and tape audio are controlled by toggle switches. Sidetone (S/T) is controlled internally, and receive volume, ICS volume, and ICS VOX squelch are managed with individual rotary controls.
  • Pilot Isolate Mode with Call annunciator
  • 3 internally generated ground triggered Alerts
  • Dzus rail-mounted with a lighted faceplate
  • Directly switched microphones allow transceiver interfacing
  • Sidetone, ICS audio, and RX audio can be individually set
  • Pilot and co-pilot have boom mic support with both ICS and XMIT functions via cyclic or yoke switching
  • Provides Live (Hot Mic) and VOX ICS with a transparent function that allows immediate transmission without further control panel switching and immediate return to ICS operation on completion
  • ICS (intercom) function uses dynamic noise reduction and active filtering to provide the clearest possible sound
  • All switches, relay contacts and external connections are gold-plated for maximum reliability; plus all switches and relays are sealed

    Install kit: AA90-IKC

Weight: 2.1 lb

Dimensions: 1.9" H x 5" W x 6.82" D

Full pilot and co-pilot support

2 Comm 2 FM and AUX XCVR positions

5 Nav-Aids plus music input

KEYED, LIVE, VOX ICS with front panel control

3-level alerting

ICS CALL annunciator

Illuminated TX selector knob

1 direct audio input

SINGLE CHANNEL AUDIO CONTROLLER/EMS CREW/5 TRANSCEIVER/3 RECEIVE/with EMS equipment audio input
price: $3,458.40
part num: AA95-729
Coupled with AA95-728(s) for the flight crew up front, the AA95-729 provides audio control tailored for EMS medical crew. The AA95 series provide control for all aircraft audio: transceivers, receivers, direct input(s), intercom, crew isolation and emergency mode.
  • Full support for Doctor, Nurse and Attendant
  • ICS only for 2 positions plus patient
  • Patient On/Off Switch (Headphones only)
  • ICS CALL switch for use during Pilot (PLT) Isolate (ISO) operation
  • PLT ISO annunciator
  • 2 Comm, 2 FM and AUX XCVR positions
  • ADF, Doppler and music inputs
  • KEYED, LIVE or VOX ICS with front panel control
  • Illuminated TX selector knob
  • NVIS compliant options available

    Install kit: AA90-IKC


AUDIO CONTROLLER/CUSTOM
price: $4,053.50
part num: AA95-968
The AA95 series provide control for all aircraft audio, allowing selection of transmit and receive audio, LIVE, KEYED, or VOX intercom, interface for an additional hand held transmit microphone (hand mic), and pilot isolation/emergency operation.

AUDIO CONTROLLER / CUSTOM
price: $4,053.50
part num: AA95-975
The AA95 series provide control for all aircraft audio, allowing selection of transmit and receive audio, LIVE, KEYED, or VOX intercom, interface for an additional hand held transmit microphone (hand mic), and pilot isolation/emergency operation.
Full pilot and co-pilot support, 2 Comm, 2 FM and AUX transceiver positions. 5 Nav Aids plus music input. KEYED, LIVE, VOX ICS with front panel control. 3 level alerting, ICS CALL annunciator, illuminated TX selector knob. 1 direct audio input.
Weight: 2.0 lb / 0.91 kg
Power: 0.25 A / 28 VDC
Install Kit: AA90-IKC (Crimp)

CUSTOM AUDIO PANEL
price: $4,450.60
part num: AA97-454

AUDIO CONT/CUSTOM/28V
price: $5,043.50
part num: AA97-453
Custom version of the AA97 Audio Controller. Night Vision compliant. 28 V.

The AA97 is a variation of the AA95 series with the addition of individual RX level controls on each of 6 transceivers. Other functions include LIVE/KEYED/VOX ICS, PA/XMIT switch, RX & ICS master level controls, and an ISO/EMERGENCY switch. Non-standard case size to 3.0" Dzus height. Connector compatible to AA90 series units with some variation.

Mechanical:
  • H x W x D - 1.88" x 5.75" x 6.77" (47.7mm x 146.1mm x 172mm)
  • Tray mount - 2.00" x 6.25" x 6.77" (78.7mm x 246.1 mm x 172mm)

Electrical:
  • Power - 28 VDC at 250 mA typical (Excluding lamps)
  • Lamps - 160 mA/28 VDC (Max. 600 mA/5 VDC)
Environmental Categories:
  • Temperature:
    • (Operational) - -20 C to +55 C
    • (Survival) -55 C to +85 C
  • Altitude - 25,000 ft max.
  • Humidity - 95%
  • Shock - 12 g (any axis)
ICS:
  • Modes - LIVE/KEYED/VOX
  • Noise Reduction - ANF™ Active Noise Filtering
Interface:
  • Key Logic - Ground seeking inputs for all lines
    • Hard ground outputs to all transceivers
    • TX LED lights with any transmit key input EXCEPT hand mic
  • Headset - Nominal 600 ohm loads, short circuit protected 500 mW/150 ohm (AMS43, AA95, 96, 97)
    • 400 mW/150 ohm/side (AMS42, AMS44, AA92H, AA94)

CUSTOM AUDIO PANEL
price: $5,043.50
part num: AA97-455

The AA97 is a variation of the AA95 series with the addition of individual RX level controls on each of 6 transceivers. Other functions include LIVE/KEYED/VOX ICS, PA/XMIT switch, RX & ICS master level controls, and an ISO/EMERGENCY switch. Non-standard case size to 3.0" Dzus height. Connector compatible to AA90 series units with some variation.


Mechanical:
H x W x D1.88” x 5.75” x 6.77” (47.7mm x 146.1mm x 172mm)
Tray mount2.00” x 6.25” x 6.77” (78.7mm x 246.1 mm x 172mm)
Electrical:
Power22 - 32 VDC at 250 mA typical (Excluding lamps)
Lamps160 mA/28 VDC (Max. 600 mA/5 VDC)
Environmental Categories:
Temperature(Operational) -20 C to +55 C (Survival) -55 C to +85 C
Altitude25,000 ft max.
Humidity95%
Shock12 g (any axis)
ICS:
ModesLIVE/KEYED/VOX
Noise ReductionANF™ Active Noise Filtering
Interface:
Key LogicGround seeking inputs for all lines
Hard ground outputs to all transceivers
TX LED lights with any transmit key input EXCEPT hand mic
HeadsetNominal 600 ohm loads, short circuit protected 500 mW/150 ohm (AMS43, AA95, 96, 97)
400 mW/150 ohm/side (AMS42, AMS44, AA92H, AA94)

AUDIO CONTROLLER/DUAL CHANNEL
price: $3,538.70
part num: AMS42
AEM's extensive Multi-User Audio Management System controllers offer a wide range of features optimized to fit the widest possible cross-section of aircraft applications. AEM controllers are used in all types of light, medium and heavy helicopters as well as twin, turboprop, commuter and jet aircraft. Some models provide users the ability to customize controllers to meet unique needs and missions.

Dual Channel: Specifically designed for special mission applications, the AMS42 and AMS44 have dual radio controls to independently select radio transmit and receiver audio. The dual channel configuration provides independent radio control for pilot and co-pilot within the space of a single controller plus intercom support for the crew and five passengers. Each pilot can choose the communications set-up specific to their role in the mission. The pilot can be selected on COM 1 while the co-pilot transmits and receives on FM 2 for true split transmit capabilities.

A full selection of receiver select switches are provided for each channel to further enable the pilots to remain independent from each other. The AMS42 and AMS44 have transmit capability for 5 COMs with "Auto-receive" function. The AMS44 has select monitoring switching for each COM plus 5 NAVs. The AMS42 has receiver select switches for the first 4 COMs. COM 5 is set up for auto-receive only. NAV inputs are selectable by internal dip switches. The AA92H and AA94 series provide the ability to customize controllers to meet specific needs and missions.



AUDIO CONTROLLER/DUAL CHANNEL - FOREST SERVICE
price: $3,538.70
part num: AMS42F

AEM’s extensive Multi-User Audio Management System controllers offer a wide range of features optimized to fit the widest possible cross-section of aircraft applications. Available in either single or dual channel configurations, AEM controllers are used in all types of light, medium and heavy helicopters as well as twin, turboprop, commuter and jet aircraft. Some models provide users the ability to customize controllers to meet unique needs and missions.

Dual Channel: Specifically designed for special mission applications, the AMS42 and AMS44 have dual radio controls to independently select radio transmit and receiver audio. The dual channel configuration provides independent radio control for pilot and co-pilot within the space of a single controller plus intercom support for the crew and five passengers. Each pilot can choose the communications set-up specific to their role in the mission. The pilot can be selected on COM 1 while the co-pilot transmits and receives on FM 2 for true split transmit capabilities.

A full selection of receiver select switches are provided for each channel to further enable the pilots to remain independent from each other. The AMS42 and AMS44 have transmit capability for 5 COMs with “Auto-receive” function. The AMS44 has select monitoring switching for each COM plus 5 NAVs. The AMS42 has receiver select switches for the first 4 COMs. COM 5 is set up for auto-receive only. NAV inputs are selectable by internal dip switches. The AA92H and AA94 series provide the ability to customize controllers to meet specific needs and missions.



COM 1, AUX 1, FM 1, FM 2, AUX 2, PA Xcvrs. RX and ICS level controls each side. Internal switch selection of hand mic and PAX audio source. 8 RX inputs internal switch selectable. 3 ICS modes: LIVE/KEYED/VOX. Front panel VOX squelch adjustment. High power output (400 mW/channel). 2 Direct (un-switched) alerting inputs. Locking Mode switch. ICS Tie line.
Weight: 2.3 lb / 1.04 kg
Power: 0.25 A / 28 VDC
Install Kit: AA90-IKC (Crimp)

AUDIO CONTROLLER/DUAL CHANNEL - US FOREST SERVICES
price: $3,558.50
part num: AMS42U
Due to the US Forest Service's increased requirements for radio audio management, AEM developed the AMS42U Dual Channel Audio Controller. Based on the original AMS42 and AMS42F audio controllers, the AMS42U improves on these designs with a 5 comm configuration that includes RX and TX select capabilities along with auto-receive functionality. Like its predecessors, the AMS42U provides dual audio control so that the pilot and co-pilot both have independent radio control along with intercom support for the crew and passengers. The pilot and co-pilot can select the communications setup that best fits their mission role; for example, the pilot can use COM 1 while the co-pilot uses FM 2. The integrated intercom supports two crew members plus five passengers with high headphone output (up to 500 mW per channel) and AEM's high performance Active Noise Filtering (ANF) system for crystal-clear audio.
  • Provides increased audio management with a 5 comm configuration that includes RX and TX select capabilities and auto-receive functionality
  • Dual audio control system for independent use by pilot and co-pilot
  • Equipped with an integrated intercom system that supports two crew members and five passengers 500 mW per channel headphone output and a high performance Active Noise Filter system
  • Two un-switched, direct audio inputs
  • Equipped with a panel selectable emergency mode switch
  • Fully interchangeable with other AMS42/44 series units

Weight:
2.3 lb

Dimensions:
1.88" H x 5.75" W x 6.77" D

Power:
0.35 A / 28 Vdc

Operating temperature:
-20 C to +55 C

Survival temperature:
-55 C to +85 C

Altitude:
25,000 ft max

ICS modes:
LIVE/KEYED/VOX

Noise reduction:
ANF Active Noise Filtering

AUDIO CONTROLLER/DUAL CHANNEL
price: $3,559.60
part num: AMS44
AEM's extensive Multi-User Audio Management System controllers offer a wide range of features optimized to fit the widest possible cross-section of aircraft applications. AEM controllers are used in all types of light, medium and heavy helicopters as well as twin, turboprop, commuter and jet aircraft. Some models provide users the ability to customize controllers to meet unique needs and missions.

Dual Channel: Specifically designed for special mission applications, the AMS42 and AMS44 have dual radio controls to independently select radio transmit and receiver audio. The dual channel configuration provides independent radio control for pilot and co-pilot within the space of a single controller plus intercom support for the crew and five passengers. Each pilot can choose the communications set-up specific to their role in the mission. The pilot can be selected on COM 1 while the co-pilot transmits and receives on FM 2 for true split transmit capabilities.

A full selection of receiver select switches are provided for each channel to further enable the pilots to remain independent from each other. The AMS42 and AMS44 have transmit capability for 5 COMs with "Auto-receive" function. The AMS44 has select monitoring switching for each COM plus 5 NAVs. The AMS42 has receiver select switches for the first 4 COMs. COM 5 is set up for auto-receive only. NAV inputs are selectable by internal dip switches. The AA92H and AA94 series provide the ability to customize controllers to meet specific needs and missions.


Technical Specifications

Mechanical:
H x W x D1.88" x 5.75" x 6.77" (47.7mm x 146.1mm x 172mm)
Tray mount2.00" x 6.25" x 6.77" (78.7mm x 246.1 mm x 172mm)
Electrical:
Power22 - 32 VDC at 250 mA typical (Excluding lamps)
Lamps160 mA/28 VDC (Max. 600 mA/5 VDC)
Environmental Categories:
Temperature(Operational) -20 C to +55 C (Survival) -55 C to +85 C
Altitude25,000 ft max.
Humidity95%
Shock12 g (any axis)
ICS:
ModesLIVE/KEYED/VOX
Noise ReductionANF™ Active Noise Filtering
Interface:
Key LogicGround seeking inputs for all lines
Hard ground outputs to all transceivers
TX LED lights with any transmit key input EXCEPT hand mic
HeadsetNominal 600 ohm loads, short circuit protected 500 mW/150 ohm (AMS43, AA95, 96, 97)
400 mW/150 ohm/side (AMS42, AMS44, AA92H, AA94)

AMS44/TRAY MOUNT
price: $4,075.50
part num: AMS44T
AEM’s extensive Multi-User Audio Management System controllers offer a wide range of features optimized to fit the widest possible cross-section of aircraft applications. Available in either single or dual channel configurations, AEM controllers are used in all types of light, medium and heavy helicopters as well as twin, turboprop, commuter and jet aircraft. Some models provide users the ability to customize controllers to meet unique needs and missions.

Dual Channel: Specifically designed for special mission applications, the AMS42 and AMS44 have dual radio controls to independently select radio transmit and receiver audio. The dual channel configuration provides independent radio control for pilot and co-pilot within the space of a single controller plus intercom support for the crew and five passengers. Each pilot can choose the communications set-up specific to their role in the mission. The pilot can be selected on COM 1 while the co-pilot transmits and receives on FM 2 for true split transmit capabilities.

A full selection of receiver select switches are provided for each channel to further enable the pilots to remain independent from each other. The AMS42 and AMS44 have transmit capability for 5 COMs with “Auto-receive” function. The AMS44 has select monitoring switching for each COM plus 5 NAVs. The AMS42 has receiver select switches for the first 4 COMs. COM 5 is set up for auto-receive only. NAV inputs are selectable by internal dip switches. The AA92H and AA94 series provide the ability to customize controllers to meet specific needs and missions.

Intercom: An integral intercom features one of the highest headphone outputs in the industry with up to 500 mW per channel. Single channel controllers support 2 crew plus 4 passengers, dual channel controllers support 2 crew plus 5 passengers. The intercom system features AEM’s unique high performance Active Noise Filtering (ANF™) system to achieve the best possible intercommunications in noisy aircraft environments. Voice activated squelch (VOX) uses AEM’s voice-tracking circuit that combines low noise audio processing with selective voice-band squelch triggering for effective hands-free ICS operation. Dual channel controllers provide a Pilot Isolate mode to allow the pilot to separate from the intercom system for complete isolation.

Direct Inputs: Two direct inputs accommodate functions such as Rad Alt, GPS Alerts, Low Rotor, or Telephone ringer.

Emergency Mode: Front panel selectable emergency mode switches the pilot (and co-pilot in Dual Channel models) headphones directly to the selected radios. Mic control is maintained via the transmit select switch for each available radio.

Internal Audio Alerting: Three Internal alert tone generators are available in the AMS43, AA95 and AA97 series: single-tone, two-tone, and timed siren (for DH warning). These alerts are used to supplement airframe warnings such as low rotor RPM, engine out, or DH alerting, but can also be used for functions such as passenger call alerts.

Tray Mount Option: AMS series audio controllers can be ordered in an aircraft standard 6.25” avionics tray mount package for general aviation applications. Add the “T” suffix to the part number and order the tray style installation kit.



COM 1, COM 2, FM 1, FM 2, AUX, PA Xcvrs. NAV 1, NAV 2, ADF, DME, MKR RX switches. RX and ICS level controls each side. Internal switch selection of hand mic and PAX audio source. 3 ICS modes: LIVE/KEYED/VOX. Front panel VOX squelch adjustment. High power output (400 mW/channel). Direct alerting input. ICS Tie line. Locking Mode switch.
Weight: 2.7 lb / 1.23 kg
Power: 0.35 A / 28 VDC
Mechanical:
H x W x D 1.88” x 5.75” x 6.77” (47.7mm x 146.1mm x 172mm)
Tray mount 2.00” x 6.25” x 6.77” (78.7mm x 246.1 mm x 172mm)
Electrical:
Power 22 - 32 VDC at 250 mA typical (Excluding lamps)
Lamps 160 mA/28 VDC (Max. 600 mA/5 VDC)
Environmental Categories:
Temperature (Operational) -20 C to +55 C (Survival) -55 C to +85 C
Altitude 25,000 ft max.
Humidity 95%
Shock 12 g (any axis)
ICS:
Modes LIVE/KEYED/VOX
Noise Reduction ANF™ Active Noise Filtering
Interface:
Key Logic Ground seeking inputs for all lines
Hard ground outputs to all transceivers
TX LED lights with any transmit key input EXCEPT hand mic
Headset Nominal 600 ohm loads, short circuit protected 500 mW/150 ohm (AMS43, AA95, 96, 97)
400 mW/150 ohm/side (AMS42, AMS44, AA92H, AA94)

Install Kit: AA90T-IKC (Crimp)

7 TRANSCEIVER AUDIO CONTROLLER W/ VOLUME CONTROL
price: $8,089.40
part num: N335-002

The N335 audio controllers are compatible with military and civil aviation headsets. The N335 controls the audio from multiple receivers, and allows transmission of mic audio to a selected transmitter. VOX intercom operation is also provided on a proprietary tie line to multiple units. A fully redundant backup system is selectable from the front panel and a CVR output is provided.

The N335-002 Audio Controller has an NVIS Green “A” lighted front panel. It provides radio transmit and receive audio select capability for the crew position. It also provides common intercom functions for up to two headset stations and allows intercom capability to the other audio controllers via the ICS Tie Line. A CALL switch allows the operator to signal the other users in the system that they need to communicate, if they are in an ‘isolate’ mode.



CONTROL/2X/MOTOROLA ASTRO
price: $6,228.20
part num: TH250-2DD1
Tac/Com II™ controls are modular in
design and software driven which allows
the system to be continuously changed
and upgraded. Slave control heads
are serially interfaced to a master unit
to allow remote channelling of radios
by a second operator with minimal
interconnect wiring. Supplemental
equipment includes encryption
encoders/decoders, DTMF keypads,
and relay/simulcast controllers.
<table width="347" border="1">
<tr class="xar-alt">
<td width="175">Mechanical</td>
<td width="156"> </td>
</tr>
<tr class="xar-norm">
<td>Dimensions</td>
<td>TH250/260/350/360<br />
3.0” H x 5.75” W x 6.3” D</td>
</tr>
<tr class="xar-alt">
<td>Weight</td>
<td>2.5 - 3.2 lbs, depending<br />
on type.</td>
</tr>
<tr class="xar-norm">
<td>Mounting</td>
<td>Dzus</td>
</tr>
<tr class="xar-alt">
<td>Environmental</td>
<td> </td>
</tr>
<tr class="xar-norm">
<td height="48"><p>Temperature</p>
<p>(Operational)</p>
<p>(Survival</p></td>
<td><p> </p>
<p>-20 C to +55 C </p>
<p>-55 C to +185 C </p></td>
</tr>
<tr class="xar-alt">
<td>Shock & Vibration</td>
<td>DO160B</td>
</tr>
<tr class="xar-norm">
<td>Humidity</td>
<td>90%</td>
</tr>
<tr class="xar-alt">
<td>Altitude</td>
<td>15,000 ft (unpress.)</td>
</tr>
</table>

Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »