Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
BNC MALE TO 4mm SAFTEY JACK
price: $15.61
part num: CT-2412
BNC male to 4mm safety jacks - turn you BNC female coaxial connector into double safety jacks. Use standard test leads while maintaining insulation safety.

  • Materials: Body: Polyamide (Nylon); Contact: Brass, Nickel Plt.
  • Banana Contact: BeCu, Nickel Plt.


100 MHZ SCOPE PROBES
price: $24.20
part num: CT-2674A
Cal Test Electronics' most popular replacement probe. Its 100MHz bandwidth (10x position) allows it to work with all types of general purpose oscilloscopes. The REF position on the thumb switch quickly provides ground point referencing.
The probe is supplied in a convenient clear plastic pouch along with a full complement of accessories.


  • Attenuation selection - 1x/10x/REF
  • Wide compensation adjustment in BNC box
  • Meets IEC61010-031 CATI @ 600V
  • Accessories included: 15cm Ground Lead, Replacement Tip, Black Snap-on Sprung Hook, Tip Insulator, IC Tip, BNC Adapter, Probe Tip Ground, Trimmer Tool, & Coding Rings.



200 MHZ O-SCOPE PROBE
price: $28.60
part num: CT-2675A
200 MHz, 3-Position Switchable Oscilloscope Probe

This family of oscilloscope probes offer excellent performance at an economical price. 3-position switchable, x1/x10/Ref, with bandwidths up to 100Mhz. These probes work with the most popular scopes from Tec, HP, B&K, Hitachi and Yokogawa.
  • Meets IEC1010-2-031 CAT I 600V
  • Compensation adjustment in BNC connector for low noise
  • 3-selectable attenuation positions: x1/x10/Ref
  • Probe Body & Cable separate for ease of repair
  • Cable length 1.2m
  • Full accessories included


  • PROBE TIP FOR CT-2674A/BLACK
    price: $1.86
    part num: CT-2711
    PROBE TIP FOR CT-2674A
    Replacement Tip, Threaded

    • Gold plated replacement tip
    • Most often requested accessory


    TEST PROBES/HIGH PERFOMANCE
    price: $47.85
    part num: CT-2850
    Highest bandwidth in the 3-position Switchable probe family. For all types of oscilloscope when you need the limiting bandwidth to be the oscilloscope and not the probe.
    • Attenuation selection - 1x/10x/REF
    • Exceptional bandwidth in the 1x position
    • Wide compensation adjustment in BNC box
    • Meets IEC61010-031 CATI @ 600V
    • Accessories included: 15cm Ground Lead, Replacement Tip, Black Snap-on Sprung Hook, Tip Insulator, IC Tip, BNC Adapter, Probe Tip Ground, Trimmer Tool, & Coding Rings.



    SAFETY JACK/PUSH IN/RED
    price: $1.09
    part num: CT-2912-2
    4mm Safety Jack (socket) accepts sheathed or shrouded banana plugs and meets the latest international safety standard IEC61010-031 to 1,000V CATIII. Fast Push-in assembly in either metal or plastic panels.
    • Materials: Body: Polyamide (Nylon); Jack: Brass, Nickel Plt
    • Minimum Panel Thickness: Plastic .080" (2mm); Metal .060" (1.5mm)


    Termination is with 1.9mm diameter x 12mm long pin for wire wrap or insertion into a PCB.

    DIY SHEATHED JACK/PAIR
    price: $5.86
    part num: CT-3207
    DIY SHEATHED JACK/PAIR
    Fully Insulated in-line jack.
    • Provides 1,000V IEC61010-031 rating when assembled correctly.
    • Set screws provide solderless assembly.
    • Three (3) piece assembly easily snaps together
    • Model 3207W includes 1.5mm Allen Wrench w/ Jack pair
    • Materials: Body: Polyamide (Nylon); Jack: Brass, Nickel Plt



    PROBE ATTENUATOR TIP ASSEMBLY
    price: $24.75
    part num: CT-3667
    Replacement attenuator tip assembly. 10x 500 MHz.
    • Temperature, deg C = -10 to 55 degC
    • RoHS (2002/95/EC) = Compliant


    DIFFERENTIAL PROBE/25 MHz
    price: $352.00
    part num: CT2593-2
    Active Differential Oscilloscope Probe, x10/x100 Selectable

    The CT2593-2 is an active differential probe with 2-selectable attenuation ranges. It allows safe and accurate floating measurements of power converter circuits. The probe incorporates a 2-range high impedance balanced attenuator and differential amplifier to convert signals with high voltage common mode to a low voltage BNC output. It is approved to IEC1010-1.

    • Battery powered with connector of optional 6V adapter
    • 2-selectable attenuation positions: x10/x100/Ref
    • No isolation amplifier required
    • Safe for floating measurements with a grounded oscilloscope
    • Hook-probe accessories included


    ACCESSORY KIT for digital multimeter. The kit includes 1 pair of black and red, 1-meter silicone test leads with 4mm straight to right-angle sheathed banana plugs, 1 pair of test probe bodies with 2mm tips and 8-32 attachment threads,and 1 pair of insulated alligator clips with 8-32 threads.
    price: $30.53
    part num: CT3738

    100 MHz DIGITAL OSCILLOSCOPE
    price: $1,094.50
    part num: DS-1100
    DC to 100MHz frequency bandwidth with 2 channels
    Equivalent 25Gs/s (Max Real Time 200MS/s)
    10ns peak detection for glitch capture
    10K bytes long memory for flexible waveform Zoom in/out
    Auto trigger level setting to 50% and Auto-set
    Automatic measurements and FFT analysis
    Direct single trigger capture function by using a hot-key
    Saving 10 waveforms & 10 setup parameters
    PC interface with RS-232C and/or USB
    Parallel port for hard copy.

    250MHz DIGITAL OSCILLOSCOPE W/ RS232C/USB INTERFACE
    price: $1,424.50
    part num: DS-1250

    Description

    • EZ digital has offered a wide range of digital oscilloscopes to meet the various requirements from the every part of the marketplace with excellent features and functions available on higher-priced oscilloscopes.
    • Wide frequency bandwidth up to 250MHz, Max. 25GS/s equivalent sampling rate, 32KBytes memory long length and 10ns peak detection for glitch, Pass-Fail, FFT , Hold-off functions, RS-232C ,USB, SPP Interfaces available to work with PC.

    Specifications

    • Frequency bandwidth: DC 250MHz
    • 5.7" Mono & Color LCD Display, 2 CH Dual digitizer
    • 200MS/s sampling rate for one channel only
    • 25GS/s equivalent sampling rate per channel
    • Vertical volt/div: 2mV/div ~ 5V/div
    • Horizontal time/div : 5nS/div ~ 5S/div
    • 10ns peak detection for glitch capture
    • Save & recall 10 waveforms & 10 setup parameters
    • FFT, hold-off, pass-fail, pre-trigger, roll mode, auto setup, etc.
    • Max. Input voltage: 400V (DC + AC peak)
    • RS-232C, USB, printer interface available(option)

    Price USD 700 / unit
    Size 370 x 388 x 167 Millimeters
    Packaging 2 units per carton
    Delivery lead time 30days after frim offer
    Minimum order 10units
    Supply ability 500units/month

    20MHz/2CH/DUAL TRACE O-SCOPE
    price: $434.50
    part num: OS-5020
    DC to 20MHz bandwidth, 2 channels, Dual trace
    oscilloscope
    • 6" rectangular CRT with internal graticule
    • Sensitivity 1mV/div
    • ALT triggering function in VERT mode
    • CH2 polarity inversion switch


    20MHz OSCILLOSCOPE w/ FUNCTION GENERATOR
    price: $654.50
    part num: OS-5020G
    DC to 20MHz bandwidth, 2 channels, Dual trace
    oscilloscope

    • 6" rectangular CRT with internal graticule
    • Variable hold-off for observation of wave forms with complex periods
    • Vertical deflection magnification X 5
    • Sensitivity 1mV/div



    100 MHZ O-SCOPE
    price: $1,149.50
    part num: OS-5100
    DC to 100MHz bandwidth, 2 channels, Dual trace oscilliscope.




    100 MHZ/4CH/ANALOG/OSCOPE
    price: $1,461.43
    part num: OS-5100RA
    DC to 100MHz bandwidth, 4 channels, 8 trace
    oscilloscope


    100 MHZ O-SCOPE
    price: $1,304.28
    part num: OS-5100RB
    DC to 100MHz bandwidth, 2 channels, 4 trace oscilliscope
    6" rectangular CRT with internal graticule
    HF / LF reject trigger filter
    Auto set function
    Frequency counter function (only on auto set) Readout cursor function








    COMPONENT ANALYZER
    price: $192.50
    part num: TD-100
    The TD-100 component analyzer connected to any two channel X-Y oscilloscope enables the user to quickly test electronic components in or out of circuit.


    Pre-Owned Parts Inventory


    FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
    If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

    Click to Enlarge
    BENDIX/KING RDS-86 RADAR SYSTEM

    View Item Details »

    Promotions


    As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

    Promotion: Mid-Continent MD-302
    Price: $10,295.00
    Desc:
    Promotion: ASPEN 1000 PRO
    Price: $10,295.00
    Desc: get your aspen installed out the door most aircraft for 10295.00

    Part Request Form Fields marked with are required to add


      352-796-1663   ai: KBKV

    Mid-Continent MD-302

    View Promotion Details »

    ASPEN 1000 PRO

    View Promotion Details »

    BENDIX/KING RDS-86 RADAR SYSTEM

    View Item Details »