Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
40 MHz SCOPEMETER
price: $2,374.84
part num: 124/003S

Perform all checks while holding test leads. No ScopeMeter adjustments are necessary. The 2.8" x 2.8" display is always correct and stable. Advanced meter functions include Fast/Normal /Smooth, Zero Set, Touch Hold on A and TrendPlot. Battery power provides isolation from ground and delivers optimum mobility with no line cords or ground wire to get in the way of getting good measurements. Features optically isolated RS-232 interface.


Automatic measurements include V dc, V ac, V ac+dc, V peak max, V peak min, V peak to peak, frequency (Hz), positive pulse width, negative pulse width, positive duty cycle, negative duty cycle, A ac, A dc, A ac+dc, phase, temperature °C, temperature °F, dBV, dBm into 50 O and 600 O. The 124 model also provides cursor measurements for the following modes: single or dual vertical cursor, dual horizontal cursor, rise- or falltime. Trendplot recording has a timespan of up to 16 days with a resolution of 1.5 hours.



FLUKE 123/SCOPEMETER
price: $1,587.25
part num: 123/003

FLUKE123/SCOPEMETER & SOFTWARE
price: $1,960.15
part num: 123/003S
  • Fluke 124: 40 MHz Bandwidth, 25 MS/s
  • Fluke 123: 20 MHz Bandwidth, 25 MS/s
  • Two Channels, Scope or DMM mode
  • 5 mV to 500 V/div
  • 60 s to 20 ns/div
  • NTSC, PAL, SECAM video triggering
  • True-RMS DMM with 5000 count / 0.5% accuracy
  • 2 Channel TrendPlot for recording trends and intermittents
  • Optical RS-232 port for connection to PC's
  • Connect-And-View allows for quick hands-off operation
  • NEW - Improved Battery Charge Process
  • Lightweight (2.5 lb./1.2 kg.)


CD-ROM FOR FLUKE 1520
price: call us for cost
part num: 1558934
Fluke 1520 MegOhmMeter:
  • Large, backlit LCD with analog bar graph and digital display
  • Three output voltages for insulation resistance testing: 250V, 500V, 1000V
  • Insulation resistance testing up to 4000 M Ohms; switches automatically to voltage measurement when voltage is greater than 30V ac or 30V dc.
  • ac/dc voltage measurement up to 600V
  • Lo-Ohms function for testing connections
  • Last reading memory display
  • 4 C-cell batteries for up to 5,000 tests per EN61557-2, with battery-life indicator and auto shut-off.
  • Autodischarge of capacitive voltage charges
  • Rugged, splash-proof case with impact absorbing holster.

Fluke 1520 MegOhmMeter
Specifications
Auto ranges
Accuracy: To 100 MO
Resolution: 0.001MO to 10 MO
Range: 4.000 MO, 40.00 MO, 400.0 MO, 4000 MO
Test voltage
Accuracy: +20%, -0%
Range: 250V, 500V, 1000V
Max measurement current

1 mA
Audible/visible voltage warning

>= 30V ac or dc
Lo-Ohms Resistance
Accuracy: 2% + 2 counts
Resolution: 0.01O
Range: 0 to 40.00O
Lo-Ohms Analog bar graph

0 to 100O
Lo-Ohms Audible/visible voltage warning

>= 30V ac or dc
Resistance
Accuracy: 2% + 2 counts
Resolution: 1O
Range: 4 kO
Analog bar graph

0 to 10 kO
Voltage
Range: 0 to 600V ac (50/60 Hz), 0 to 600V dc
Accuracy: 2% + 2 counts
Resolution: 1V

Environmental Specifications
Operating Temperature

-10°C to +50°C ( +14°F to +122°F)
Storage Temperature

-40°C to +70°C (-40°F to +158°F)
Humidity (Without Condensation)

75% RH (40°C) or (104°F)
Dust/water resistance

IP42 per IEC 529
Operating Altitude

2,500 m max (8125 ft max)

Safety Specifications
Electrical Safety

Meets IEC 1010-1 and EN 61557
Protection type

Pollution degree II
Overvoltage category

IEC 1010-1 CAT III 600V
Agency Approvals

UL, CSA, TÜV (pending)

Mechanical & General Specifications
Battery check function

Indicates remaining percent of charge
Size

241mm x 108mm x 72 mm (9.5" x 4.25" x 2")
Weight

1.1 kg (2.5 lbs)
Batteries

4 C size 1.5V alkaline
Warranty

3 years


DIGITAL MULTIMETER KIT
price: $348.65
part num: 179/1AC-II
Setting the new multimeter standard

The three models of the new 170 Series are the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability.

True RMS Multimeter All models include:
  • 80BK Temperature Probe (179 only)
  • Installed 9V battery
  • Test leads
  • Users manual

The pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.



Fluke 170 Series Digital Multimeters
Specifications
Voltage DC
175 - Accuracy* ± (0.15%+2)
177 - Accuracy* ± (0.09%+2)
179 - Accuracy* ± (0.09%+2)
Max. Resolution 0.1 mV
Maximum 1000 V
Voltage AC
Accuracy* ± (1.0%+3)
Max. Resolution 0.1 mV
Maximum 1000 V
Current DC
Accuracy* ± (1.0%+3)
Max. Resolution 0.01 mA
Maximum 10 A
Current AC
Accuracy* ± (1.5%+3)
Max. Resolution 0.01 mA
Maximum 10 A
Resistance
Accuracy* ± (0.9%+1)
Max. Resolution 0.1 O
Maximum 50 MO
Capacitance
Accuracy* ± (1.2%+2)
Max. Resolution 1 nF
Maximum 10,000 µF
Frequency
Accuracy* ± (0.1%+1)
Max. Resolution 0.01 Hz
Maximum 100 kHz
Temperature
179 - Accuracy* ± (1.0%+10)
Max. Resolution 0.1°C
Range -40°C/400°C
Note
* Accuracies are best accuracies for each function

Environmental Specifications
Operating Temperature

-10°C to +50°C
Storage Temperature

-30°C to +60°C
Humidity (Without Condensation)

0% - 90% (0°C - 35°C)

0% - 70% (35°C -50°C)

Safety Specifications
Overvoltage category

EN 61010-1 to 1000 V CAT III.

EN 61010-1 to 600 V CAT IV.
Agency Approvals

UL, CSA, TÜV listed and VDE Pending

Mechanical & General Specifications
Size

43 x 90 x 185 mm
Weight

420 g
Warranty

Lifetime
Battery Life
Alkaline: ~200 hours typical, without backlight


FLUKE SCOPEMETER
price: $5,217.30
part num: 190-204/AM
For the more demanding applications, the ScopeMeter 190 Series high-performance oscilloscopes offer specifications usually found on top-end bench instruments. With up to 200 MHz bandwidth, 2.5 GS/s real-time sampling and a deep memory of 27,500 points per input they’re ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument.
  • Dual-input - 200, 100 or 60 MHz bandwidth
  • Up to 2.5 GS/s real-time sampling per input
  • High resolution Color display
  • High waveform resolution of 3,000 datapoints per channel (NEW)
  • Connect-and-View™ automatic triggering and a full range of manual trigger modes
  • Frequency Spectrum Analysis using FFT
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord™ mode
  • TrendPlot™ paperless chart recorder for trend analysis up to 22 days
  • Up to 1000 V independently floating isolated inputs
  • Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
  • Vpwm function for motor drive and frequency inverter applications.
  • 1000 V CAT II and 600 V CAT III safety certified
  • Four hours rechargeable Ni-MH battery pack

Bandwidth:
Fluke 199C: 200 MHz
Fluke 196C: 100 MHz
Fluke 192C: 60 MHz

Real-time sample rate:
Fluke 199C: 2.5 GS/s
Fluke 196C: 1 GS/s
Fluke 192C: 500 MS/s

Inputs and digitizers:
2 plus external / DMM input

Independently floating isolated inputs:
Up to 1000 V between inputs, references and ground

Timebase range:
5 ns - 2 min/div
10 ns - 2 min/div (192B)

Input sensitivity:
2 mV-100 V/div

Trigger types:
Connect-and-View™, Free Run, Single Shot, Edge, Delay, Video, Selectable pulse width and External Dual slope trigger and Event trigger (n-cycle)

Glitch capture:
50 ns (5 µs/div - 1 min/div)

Scope measurements:
Cursor: 7
Automatic: 30

Maximum record length:
ScopeRecord mode: 27,500 pts per input
Scope mode: 3,000 pts per input

Memory:
Screens + Setups: 15
Replay + Setups: 2

Display:
144 mm full color LCD with fast update rate
Persistence
Digital persistence giving analog oscilloscope-like waveform decay

Waveform Compare:
Waveform reference with automatic Pass/Fail testing

Operating Temperature:
0ºC to 50ºC

Storage Temperature:
-20°C to +60°C

Operating Altitude:
3,000 m

Electrical Safety:
1,000V CAT II/600V CAT III (EN61010-1)

Size:
256 x 169 x 64 mm

Weight:
2.0 kg

Battery Life:
NiMH: 4 hrs

RS232/USB Interface:
Optically isolated via optional PM9080/OC4USB for interfacing to Printer or PC

COLOR FLUKE SCOPEMETER 100MHZ
price: $4,039.20
part num: 196C/003S

SCOPEMETER/SOFTWARE/CABLE/CASE
price: $4,614.50
part num: 199C/003S

CAL CHARGE FOR 373 THERMOMETER
price: $93.50
part num: 373-CAL
Calibration fee for 373.

TPI/SCOPEMETER
price: $439.95
part num: 440
Model 440 ScopeMeter

6 Instruments In 1:
- 4,000 count true RMS DMM
- 1 MHz Oscilloscope
- Component Tester: visually sees signatures of all resistors, diods and semiconductors
- Logic Tester: measures all CMOS chip in circuitry
- Trend Mode: allows you to monitor a certain sine wave for a period of time
- Frequency Counter: measures up to 2MHz

Also has RS-232C output for downloading data with the optional software kit (Part#: A402)


TPI/SCOPEMETER
price: $1,094.50
part num: 460
Model 460 ScopeMeter

Handheld 20 MHz Oscilliscope
  • 20 MHz Bandwidth
  • Dual Channels
  • Built-in 4,000 count true RMS DMM
  • 500 MS/s Sampling Rate
  • Cursor Readouts
  • 3" x 3" LCD Display


FLUKE/ADAPTER/THERMOCOUPLE
price: $25.25
part num: 80AK-A
The Fluke 80AK-A thermocouple adapter is a a k-type to banana jack adapter, for use with k-type thermocouples only.

FLUKE TEMP PROBE
price: $39.55
part num: 80BK-A
  • Type-K thermocouple with standard shrouded banana jack
  • Convenient one piece construction
  • Compatible with DMMs with temperature measurement functions
  • Measurement range:-40 to 260ºC
  • One year warranty


SUREGRIP IMMERSION TEMPERATURE PROBE
price: $90.15
part num: 80PK-22
  • Type-K thermocouple for use in liquids and gels
  • Measurement range:-40 to 1090°C
  • One year warranty


PROBE
price: $131.95
part num: 80TK

AUTORANGING CAPACITANCE METER
price: $317.90
part num: 830B
The Model 830B Capacitance Meter features a large 4 1/2 digit LCD with dual display, 11,000 counts resolution, and 9 automatically selected ranges with full scale value from 1.0pF to 199.99mF. Designed to meet the latest international safety standards, the meter’s dedicated chip and microprocessor allow programmable high/low limits or pre-programmed standard capacitor tolerances, making it ideal for measuring values, inspection, sorting capacitors and testing capacitors against standard tolerances. Software and interface cable is included for PC based data logging and monitoring.

Features:
  • Auto ranging
  • Dual display simultaneously displays value and deviation from selected tolerance
  • Sort on preset tolerance of 1, 5, 10%
  • Program unique values to sort for specific circuit applications
  • USB PC interface for data logging software included


FLUKE 87-5 Industrial Electrician Combo Kit
price: $522.45
part num: 87-5/E2KIT

Fluke 87V/E2 Industrial Electrician Combo Kit

This new combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. Save over 15% compared with the individual purchase price of all the accessories.


Model Name Description
Fluke 87V True RMS Multimeter
AC220 SureGrip™ Alligator Clip Set
C35 Lightweight Soft Accessory Case
TL224 SureGrip™ Silicone Test Lead Set
80BK Integrated DMM Probe (Type K)
TP38 SureGrip™ Slim Reach Test Probe Set
TPAK Magnetic hanger

AIRFLOW METER KIT
price: $742.45
part num: 922/KIT

Analyze airflow. Easily. The 922 Micromanometer.

Today’s HVAC technicians want a simple solution for diagnosing ventilation issues. Differential pressure measurements only tell part of the story. Technicians also want to measure air velocity and flow, without having to resort to expensive, difficult to use, specialist tools. The Fluke 922 makes airflow measurements easy by combining three tools: differential pressure, airflow, and velocity into a single, rugged meter.

Use the Fluke 922 micromanometer to:
  • Measure pressure drops across key HVAC equipment to drive peak performance and extend equipment life
  • Match ventilation to occupant loads
  • Monitor indoor vs. outdoor pressure relationships and manage the building envelope
  • Promote indoor comfort and quality
  • Perform duct traversals for accurate airflow readings
Includes:
  • Fluke 922 Airflow Meter
  • 12 inch pitot tube
  • Two Rubber Hoses
  • TPak Magnetic Strip
  • TPak Strap, 9 inches
  • TPak Latch Tab
  • Four AA Batteries 1.5 V Alkaline
  • Users Manual
  • Hard Carrying Case

Technical Specifications
Air Pressure
Range/Resolution/Accuracy ± 4000 Pascals / 1 Pascal / ± 1 % + 1 Pascal

± 16 in H2O / 0.001 in H2O / ± 1 % + 0.01 in H2O

± 400 mm H2O / 0.1 mm H2O / ± 1 % + 0.1 mm H2O

± 40 mbar / 0.01 mbar / ± 1 % + 0.01 mbar

± 0.6 PSI / 0.0001 PSI / ± 1 % + 0.0001 PSI
Air Velocity
Range/Resolution/Accuracy 250 to 16,000 fpm / 1 fpm / ± 2.5 % of reading at 2000 fpm (10.00 m/s)

1 to 80 m/s / 0.001 m/s / ± 2.5 % of reading at 2000 fpm (10.00 m/s)
Air Flow (Volume)
Range/Resolution/Accuracy 0 to 99,999 cfm / 1 cfm / Accuracy is a function of velocity and duct size

0 to 99,999 / 1 m3/hr / Accuracy is a function of velocity and duct size

0 to 99,999 l/s / 1 l/s / Accuracy is a function of velocity and duct size
Temperature
Range/Resolution/Accuracy 0 °C to 50 °C / ± 1 % + 2 °C / 0.1 °C

32 °F to 122 °F / ± 1 % + 4 °F / 0.1 °F
General Specifications
Operating Temperature

0 °C to +50 °C (+32 °F to +122 °F)
Storage Temperature

-40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity

0% to 90%, non-condensing
IP Rating

IP40
Operating Altitude

2000 m
Storage Altitude

12000 m
EMI, RFI, EMC

Meets requirements for EN61326-1
Vibration

MIL-PREF-28800F, Class 3
Max Pressure at Each Port

10 PSI
Data storage capacity

99 readings
Warranty

2 years
Power, battery life

Four AA batteries
Battery Life

280 hours without backlight, 60 hours with backlight

TPI 183/PROTECTIVE BOOT
price: $10.95
part num: A101

TPI-183/CURRENT ADAPTER
price: $93.45
part num: A256

CLAMP ON ADAPTER
price: $93.45
part num: A296
AC/DC Amp Adapter 0-1000 amps.

Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »