Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
OPTIONAL POLE MOUNT GPS ANTENNA
price: $258.50
part num: 100MGAASMA

REPLACEMENT CABLE FOR BT100A
price: $103.40
part num: 130-002

25' GPS ANTENNA EXTENSION CABLE
price: $165.00
part num: 130-020A

50' GPS ANTENNA EXTENSION CABLE
price: $192.50
part num: 130-020B

75' GPS ANTENNA EXTENSION CABLE
price: $220.00
part num: 130-020C

100' GPS ANTENNA EXTENSION CABLE
price: $247.50
part num: 130-020D

CONNECTOR PIN FOR ME406
price: $3.84
part num: 150-1127
CONNECTOR PIN FOR ME406

ELT REMOTE SWITCH/2 WIRE/ARTEX
price: $1,250.04
part num: 455-0049
The Artex 2-Wire Remote Interface uses just 2 of the existing wires from the wiring harness to connect the new cockpit remote switch to an Artex 406 MHz ELT for a simplified, cost-efficient upgrade.
  • Upgrade any existing C91a ELT installation to Artex 406 MHz Technology
  • Plugs in between new cockpit remote switch and 406 MHz ELT
  • Simplify installation and reduce costs by utilizing existing 2, 3 or 4-wire configurations
  • One packlist includes all parts required for installation
  • TSO C-126 approved
  • Another retrofit solution by Cobham Avionics - Artex Products, proving our commitment to reducing installation costs for aircraft owners


ELT TEST SET/for use with ARTEX ELT's
price: $2,391.40
part num: 455-9100
Verifying an ELT's ID is easier than ever with the ELT Test Set from ARTEX. Durably constructed with a waterproof case, this device reads 406 Mhz Cospas-Sarsat Emergency Locator Transmitter (ELT) code via direct connection or wirelessly and displays the beacon ID and all other data on an easy-to-read grayscale LCD screen. In addition, all collected data is automatically saved to a database and time-stamped for reference. This is an efficient means to verify a beacon's ID for registration purposes, owner changes, reprogramming, or reinstallation.
  • Reads code transmitted by a 406 Mhz Cospas-Sarsat ELT; accesses data wirelessly via the antenna (in test mode or shielded enclosure) or it can be directly connected to the ELT
  • Displays the beacon ID and all encoded data on a backlit LCD screen
  • All collected data is saved to a database and time-stamped
  • Provides a simple, cost-effective way to verify a beacon's ID after reprogramming, owner changes, or installation on a new craft
  • Capable of printing to a serial or infrared (IrDA) enabled printer
  • Tough, waterproof case
  • In the box: ELT test set main assembly, flexible whip antenna, holster, stylus, battery, USB, charger, desktop software (CD-ROM)

Frequency range:
406 MHz (-60dBm to +36dBm), 5-watt signal

Decoding:
per Cospas-Sarsat C/S t.001 (issue 3, revision 5)

Operating system:
Palm OS 4.1.2 (upgradeable to Palm OS 4.x)

Microprocessor:
33 MHz Motorola DragonBall-VZ

Memory:
volatile: 16 megabytes SDRAM (approximately 15MB available to user), non-volatile: 4 megabytes Flash (approximately 2MB available to user

Dimensions without antenna:
6.7" x 3.7" x 1.53"

Weight with antenna:
1 lb

LCD display:
FSTN (TDF) grayscale

LCD resolution:
160 x 160 pixels

LCD viewable area:
56 mm W x 56 mm H

Battery type / voltage:
rechargeable Lithium Ion custom battery pack / 3.5 volts nominal

ELT Tester with Frequency Stability Measurement Capability/406, 121.5 & 243 MHz
price: $5,604.50
part num: BT100AVS

The aviation industry needed to measure 243 MHz so we created a series of Beacon Testers to address that need. We built on the features of our most popular model (BT100A) and added 243 MHz frequency and power measurements. In addition you can listen to the real-time audio on 121.5 MHz or 243 MHz! The BT100AV series even decodes Morse Code. With the BT100AVtriple you still get the powerful 406 MHz graphic measurements for power, phase modulation and spectrum. To comply with your Quality Assurance requirements, we now include detailed calibration data with each Certificate of Calibration.

If you don’t need 406 capabilities yet, you can get the BT100AV (121/243) version now and upgrade via the internet in the future. Internet upgrading simplifies the process ... no down time, no shipping costs, no customs hassles. A cost effective solution.

If your requirements include the need to measure 406 MHz frequency stability then the BT100AVS model is the one to choose. The BT100AVS does everything the BT100AV does plus measure 406 frequency stability.

The BT100AV series exceeds the measurement requirements for ELTs in the USA (FAA Part 91.207), in Canada (CAR 571 Appendix G), and the Europe (CAA/EuroCAE requirements). A very cost effective solution! Eliminate the need for a spectum anayzer and other costly equipment!

Don’t just decode the ELT ... analyze it!

The industry is demanding higher quality from 406 beacons and is implementing more thorough periodic testing. Beacon Testers that only decode the 406 message are not suitable to meet the increasing demands from the industry to ensure the beacons are indeed operating properly. The BT100AV series provides thorough beacon measurement capabilities at an affordable price!

ELT Tester/406, 121.5 & 243 MHz
price: $4,944.50
part num: BT100AVT

The aviation industry needed to measure 243 MHz so we created a series of Beacon Testers to address that need. We built on the features of our most popular model (BT100A) and added 243 MHz frequency and power measurements. In addition you can listen to the real-time audio on 121.5 MHz or 243 MHz! The BT100AV series even decodes Morse Code. With the BT100AVtriple you still get the powerful 406 MHz graphic measurements for power, phase modulation and spectrum. To comply with your Quality Assurance requirements, we now include detailed calibration data with each Certificate of Calibration.


The BT100AV series exceeds the measurement requirements for ELTs in the USA (FAA Part 91.207), in Canada (CAR 571 Appendix G), and the Europe (CAA/EuroCAE requirements). A very cost effective solution! Eliminate the need for a spectum anayzer and other costly equipment!

Don't just decode the ELT ... analyze it!

The industry is demanding higher quality from 406 beacons and is implementing more thorough periodic testing. Beacon Testers that only decode the 406 message are not suitable to meet the increasing demands from the industry to ensure the beacons are indeed operating properly. The BT100AV series provides thorough beacon measurement capabilities at an affordable price!



· Exceeds FAA, IC, and EuroCAE ELT inspections requirements

· Entire receiver is housed in a CompactFlashTM card!

· External coax connection accepts output of screen box or direct input (no external attenuator required)

· Measures 121.5 MHz/243 MHz parameters

· User can add text notes or audio notes to measurement

· An internal temperature sensor for measurement accuracy

· Standard 2 year calibration cycle

· Store over 200 measurements

Additional features of BT100AVtriple and BT100AVS models:

· Receives all Cospas-Sarsat past, current, and future frequency channels and decodes all Cospas-Sarsat protocols

· Direct connection power measurement accuracy to ± 1dB on 406 MHz

· Internal antenna receives 406 burst from over 10 metres away

· Graphic display of 406 MHz phase modulation

· Graphic display of 406 MHz in-band frequency spectrum

· Graphic display of 406 MHz power during the burst

· Identifies manufacturer and model number from Cospas-Sarsat Approval list


Software Upgrade for BT100 ELT Tester
price: $825.00
part num: BT100UPGRD
SOFTWARE UPGRADE FOR BT100

ELT TEST SET FOR 406 MHZ/121.5 MHZ/243 ELTS
price: $2,744.50
part num: ELTT-124K
Measure an ELT's power and frequency on all three ELT bands with the multi-band ELTT-124K 406 MHz ELT Test Set from ICARUS Instruments. This test set receives and measures 406 MHz, 121.5 MHz, and 243 MHz frequencies while also measuring radiated RF. It's also equipped with an advanced 406 message decoder that verifies the proper transmission of GPS data while also measuring the duration of phase deviation and 406 packet burst. The unit stores up to 10 sets of ELT data which can be imported into a PC database. The set provides two means of data transfer with an included antenna, direct connection cable, and attenuator.
  • Measures frequency on all 3 ELT bands including 406 MHz, 121.5 MHz, and 243 MHz including planned 406 MHz channels (see specifications for details)
  • Also measures the radiated RF power of all 3 bands (see specifications for details)
  • Has a sophisticated 406 message decoder that verifies that GPS data is being properly transmitted; and measures the time interval of the 406 transmit packet
  • Tester demodulates and decodes data stream to HEX ID, GPS latitude and longitude, country code, and 24-bit ICAO address
  • Receives all messages from any 406 MHz COSPAS-SARSAT beacon - this includes test mode signals and signals sent during alert/emergency mode
  • Stores up to 10 sets of ELT data for importing into a PC database (software package included)
  • Signals can be received via the antenna, or the tester can be directly connected to the ELT by a cable and attenuator (included)
  • Inexpensive two-year calibration cycle
  • Set includes ELTT-124 tester, antenna, attenuator with 2 cables, PC USB cable, a user manual, and a custom 2100 pelican case with foam insert

Frequencies:
- 406 MHz accurate to ±500 Hz
- 121.5 MHz accurate to ±800 Hz
- 243 MHz accurate to ±800 Hz

RF power measurement:
- 406 MHz channel in range 19 - 43 dBm with accuracy ± 0.5 dB (antenna: -34 to -10dBm ±2dB)
- 121.5 MHz channel in range 13 to 20 dBm with accuracy ± 0.5 dB (antenna: -40 to -34 dBm ±2 dB)
243 MHz channel in range 13 to 20 dBm with accuracy ± 0.5 dB (antenna: -40 to -34 dBm ±2dB)

measures positive / negative phase deviation value accurate to ± 2.8°

measures total transmission time of 406 MHz signal with accuracy ± 0.2%

measures preamble of 406 MHz signal with accuracy ± 0.2%

Power supply:
4 AA batteries or USB cable

Battery life:
approx. 6 hours

Calibration cycle:
2 years

Power use:
no more than 130 mA - standby mode with no LCD highlighting
no more than 200 mA - in standby mode with LCD highlighting
no more than 300 mA - in measure mode with LCD highlighting

HP PERSONAL DIGITAL ASSISTANT IPAQ FOR BT100A
price: $670.45
part num: HX2490
HP iPaq HX249 pocket pc, compatible with the BT100A beacon tester device.

Operating System Installed:
Microsoft Windows Mobile 5.0 for Pocket PC, Premium Edition

Processor:
Intel® PXA270 Processor

Processor speed:
520 MHz

Standard memory:
256 MB total memory (192 MB ROM and 64 MB SDRAM), up to 128 MB user available persistent storage memory

Memory slots:
SD Slot: supports 1-bit SDIO and 4-bit SD/MMC type memory standard

Dimensions (w x d x h):
7.7 x 1.6 x 11.9 cm

Weight:
164.4 g

Display type:
QVGA TFT

Display size:
3.5"

Video Resolutions:
240 x 320 (W x H), 64K colours, 16-bit

Wireless Technologies:
Integrated WLAN 802.11b, Bluetooth® 1.2, IrDA

Expansion slots:
SD Slot: supports 1-bit SDIO and 4-bit SD/MMC type memory standard, CF Slot: integrated Compact Flash Type II

Battery: removable/rechargeable 1440 mAh Lithium-Ion (user changeable), optional extended 2880 mAh

Power Requirements:
AC Power - AC Input: 100~240 Vac, 50/60 Hz, AC Input Current: 0.3 Aac max, Output Voltage: 5Vdc (typical), Output Current: 2A (typical)

Mouse/Pointing Device description:
Touch-sensitive display for stylus

Keyboard:
Foldable or thumb keyboard (optional)

External I/O ports:
Integrated IrDA (SIR), USB 2.0 Client, Serial RS232

Sound:
Integrated microphone, speaker and one 3.5 mm stereo headphone jack, MP3 stereo (through headphone jack)

Operating Temperature Range:
0 to 40° C

Operating Humidity Range:
90% RH

LIMIT TESTER/ADD ON FEATURE FOR PASS/FAIL REPORTS ON TESTS
price: $654.50
part num: LTS100
The perfect add-on module to the Beacon Tester. For each measurement the BT100 will show either a pass screen or a fail screen. The fail screen will show which parameters have failed and by how much.
  • Select required measurements
  • Test Report is in tabulated HTML format
  • Automatically determines measurement modes from BT100 settings
  • Re-test previous measurements to different limit settings


RF SCREEN BOX
price: $3,294.50
part num: TSE100
Designed specifically for testing Cospas-Sarsat beacons, the TSE100, combined with the industry standard BT100 or BT100AV Series Beacon Tester, provides the best solution for testing an ELT. The TSE100 Screen Box allows the user to verify the ELT in normal activation mode, not just self test mode. Verify the encoded GPS capabilities of ELTs; test the G-Switch in ELTs without causing false alerts.

With the patented screened gloves and the RF shielded window with interior illumination, there is full control over the ELT and Beacon Tester without the fear of causing false alerts. You can now test the G-Switch activation in a totally shielded environment.

The TSE100 – Screen Box is perfect for a dedicated test bench or for use in the field. It is portable, and lightweight - weighing only 16 lb. At a fraction of the cost of a screen room or anechoic chamber, the TSE100 Screen Box is designed to provide superior attenuation: (> 90 dB) at all ELT frequencies (121.5 MHz, 243 MHz, and 406 MHz).

Some features of the TSE100 Screen Box include:

  • GPS enabled, the TSE100 – Screen Box is GPS enabled to allow verification of GPS reception and encoding capabilities of a GPS-equipped beacon
  • Powered from a standard USB port connection, it also comes with an AC – to – USB adapter to plug into the AC mains
  • The external GPS antenna comes standard with a 16 ft cable, these optional cable lengths are available in:
    • 25' length
    • 50' length
    • 75' length
    • 100' length
  • The TSE100 – Screen Box dimensions:
    • Inside: 17 x 11 x 8.5” (43 x 28 x 22 cm)
    • Outside: 18 x 12 x 12” (46 x 30 x 30 cm)
    • Weight: 16 lb (7 kg)


Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »