Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
F CONNECTOR COUPLER/for FaultChaser F-1001
price: $3.85
part num: 1001-AD001

F CONNECTOR TO FEMALE BNC ADAPTER/for FaultChaser F-1001
price: $3.85
part num: 1001-AD002

CABLE/F Connector to RJ45 for FaultChaser F-1001
price: $15.95
part num: 1001-CA001

CABLE/Male BNC to Alligator Clips for FaultChaser F-1001
price: $15.95
part num: 1001-CA002

CABLE/F to Alligator Clips for FaultChaser F-1001
price: $15.95
part num: 1001-CA003

HANGING POUCH/for FaultChaser/F-1001
price: $22.00
part num: 1001-CP100

ACES PROBALANCER SPORT
price: $1,644.50
part num: 1015PBS
ProBalancer Sport, the pacesetter for LSA propeller balancing industry. A must for every aircraft builder and maintainer.
  • Affordable
  • Provides corrective weight solutions, not just a vibration measure
  • Calibration traceable to NIST standards
  • Easy to use
  • Analyzer learns, providing better solutions on future runs
  • No pre-set stopping point, balance as low as you like
True Dynamic Propeller Balance Kit Includes:
  • Photo Tach
  • Photo Tach Base
  • Photo Tach Cable
  • Reflective Tape
  • Vibration Sensor and Integral Cable
  • Vibration Sensor Mount
  • Propeller Protractor (electronic on CD)
  • User's Manual (electronic on CD)
  • ACES Guide to Propeller Balancing (electronic on CD)

  • Tachometer Inputs +/- 2%, 300 to 6000 RPM
  • Sensor Types The analyzer will only accept the STICP 0907003 accelerometer. The output is 10 m V per g and is preprogrammed to the ProBalancer Sport.
  • Vibration Amplitude +/- 2%
  • Frequency Range 300-6000 RPM
  • Display LCD, Contrast Adjustable, and continuous back light
  • Power Supply Rechargeable equibalent Nickel Metal Hydride(NiMH) batteries or 4 each AA size batteries
  • Physical Size 1 lbs and 7.5" (8" including connectors) Long X 1.25" Deep X 4" Wide
  • Weight Approximately 2.0 lbs assembled
  • Operation Temperature Range -20° C to 70°

OPTION 2020 ENHANCED PROPELLER
price: $355.30
part num: 11-9000001

SINGLE AXIS RATE TABLE
price: $17,380.00
part num: 1270VS
Rate Only, No Positioning RATE RANGE: .0167 to 360 deg/sec, or 1 to 21,600 deg/min.

This test instrument is used for the testing and calibration of sensors and gyroscopic instruments which require a precise and accurate angular velocity. The 1270VS rate table is an automated, variable speed table with a 21,600:1 speed range.

The front panel controls and liquid crystal display give the user full digital rate entry with multiple rate presets. The front panel consists of a power switch, LCD display, and four keys: run/menu, increase, decrease, and enter.

Full computer controlled automation can be accomplished with an RS-232 (standard) or IEEE-488 (optional) interface. The closed-loop motion control system consists of a DC servo gearmotor, a controller, and an optical encoder. The encoder is located on the high speed shaft of the gearmotor to provide high resolution feedback for precise speed regulation. A gear train with electric clutches is used to select four different ranges.

The rate table can turn in both clockwise and counterclockwise directions. Clutches protect the gear train if large forces are applied to the tabletop. A four-point contact bearing is used to resist axial, radial, and moment loads while providing smooth rotation. Slip rings and a vacuum line are also standard features of the test table.


FEATURES\OPTIONS:

  • Variable Speed Design
  • RS-232 Interface (optional IEEE-488)
  • Monitor Actual Speed with LCD Display
  • 0.1% Speed Accuracy
  • Bi-Directional
  • 16 Line User Slip Ring (See Options)
  • Closed-Loop Servo Control
  • 21,600:1 Overall Speed Range
  • 1-9.999 deg/min, 10-99.99 deg/min, 100-999.9 deg/min and 1000-21600 deg/min speed ranges
  • Electric Clutches
  • Vacuum Line
  • Variable Acceleration
  • Automatic Homing
  • Adjustable Rate Calibration Pulse Interval
  • Rate Calibration Pulse
  • Optional Vacuum Chamber System available
  • Optional Pedestal available
  • Customization Available (e.g. slip ring packages, table top size, etc.)


SINGLE AXIS RATE TABLE
price: $22,192.50
part num: 1270VSSR28
This test instrument is used for the testing and calibration of sensors and gyroscopic instruments which require a precise and accurate angular velocity. The 1270VS rate table is an automated, variable speed table with a 21,600:1 speed range.

The front panel controls and liquid crystal display give the user full digital rate entry with multiple rate presets. The front panel consists of a power switch, LCD display, and four keys: run/menu, increase, decrease, and enter.

Full computer controlled automation can be accomplished with an RS-232 (standard) or IEEE-488 (optional) interface. The closed-loop motion control system consists of a DC servo gearmotor, a controller, and an optical encoder. The encoder is located on the high speed shaft of the gearmotor to provide high resolution feedback for precise speed regulation. A gear train with electric clutches is used to select four different ranges.

The rate table can turn in both clockwise and counterclockwise directions. Clutches protect the gear train if large forces are applied to the tabletop. A four-point contact bearing is used to resist axial, radial, and moment loads while providing smooth rotation. Slip rings and a vacuum line are also standard features of the test table.

ARINC IBC BRAND CLEANER H125
price: $85.80
part num: 12910

The US Conec IBC™ Brand Cleaners are mechanical cleaning tools designed to clean connectors residing in an adapter or faceplate and unmated connectors. The IBC™ Brand Cleaning tools use a novel dry cleaning strand to gently sweep and lift away dust and residues from the connector end face.

Designed for cleaning fiber optic connectors in MIL/AERO 1.25mm applications

Features

  • Simple pushing motion to engage tool
  • Audible CLICK to alert the operator when tools is fully engaged
  • Over 525+ engagements per unit
  • Dry cleaning strand eliminates the need for solvents to be effective
  • Crush resistant to over 250N
  • Impact resistant to survive drops over 1.5M

The IBC™ Brand Cleaners are effective at removing the following contaminates:

  • Arizona Road Dust (ISO 12103-1)
  • Skin Oil Residue
  • Salt Water Residue
  • Alcohol Residue
  • Vegetable Residue
  • Hand Lotion
  • Distilled Water Residue
  • Graphite
  • T-shirt Lint


TWO AXIS MANUAL TILT TABLE
price: $1,870.00
part num: 1300

The table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0° to 90° . To tilt the table, loosen the knob and rotate the tilt axis by hand to the desired position; then tighten the knob to hold in position.

The tilt axis has detents every 15° for quick positioning, and there are engraved marks at 0.5° increments on the tilt axis.

The table top rotates continuously through 360° in a clockwise or counter-clockwise direction. Engraved marks are provided at 45° increments on the table top; engraved marks at 1° increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45° . Tables with optional engraved marks every 1° have detents every 15° . The tension is adjustable for the positioning detents on both the table top and the tilt axis.

A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5° of tilt.

The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately.



FEATURES:

  • Small and lightweight for easy bench mounting and manual operation
  • Two degrees of freedom for tilting and rotating test instruments
  • Spring loaded detents provide accurate table top rotary and tilt axis indexing
  • Flat, precision ground table top mounting surface
  • Anodized aluminum construction for durable corrosion resistance
  • Knurled mounting screws are available for easy instrument package mounting


2 AXIS TILT TABLE
price: $4,510.00
part num: 1310-1-L
2-Axis Tilt Table (1310).

The table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0° to 80° , or 0° to 90° , depending upon the model. Rotating the handle in the desired direction will change the tilt six degrees per revolution.

The vernier on the tilt axis is readable to one minute of arc with the vernier adjustable to ± 5°. There are engraved marks at 0.5° increments on the tilt axis.

The table top rotates continuously through 360° in a clockwise or counter-clockwise direction. Engraved marks are provided at 45° increments on the table top; engraved marks at 1° increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45° . Tables with optional engraved marks every 1° have detents every 15° . The tension is adjustable for the positioning detents on the table top.

The table includes two one-minute sensitive levels on the table base for a more accurately leveled table surface. A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5° of tilt.

The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately.
  • Small and lightweight for easy bench mounting and manual operation
  • Two degrees of freedom for tilting and rotating test instruments
  • Spring loaded detents provide accurate table top rotary indexing
  • Flat, precision ground table top mounting surface
  • Anodized aluminum construction for durable corrosion resistance
  • Sensitive bubble levels for accurate table leveling
  • Knurled mounting screws are available for easy instrument package mounting

Options:
  • Model 1310-L
  • Tilt range: ±80º
  • Engraved increment on azimuth axis: 45º
  • Model 1310-L-90
  • Tilt range: ±90º
  • Engraved increment on azimuth axis: 45º
  • Model 1310-1-L
  • Tilt range: ±80º
  • Engraved increment on azimuth axis: 1º
  • Model 1310-1-L-90
  • Tilt range: ±90º
  • Engraved increment on azimuth axis: 1º

2 AXIS MANUAL TILT TABLE
price: $3,575.00
part num: 1310-L

RANGE OF MOTION:
90º for Tilt Axis, Unlimited Rotation for Azimuth Axis; 30 lb. Load


The table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0° to 80° , or 0° to 90° , depending upon the model. Rotating the handle in the desired direction will change the tilt six degrees per revolution.

The vernier on the tilt axis is readable to one minute of arc with the vernier adjustable to ± 5°. There are engraved marks at 0.5° increments on the tilt axis.

The table top rotates continuously through 360° in a clockwise or counter-clockwise direction. Engraved marks are provided at 45° increments on the table top; engraved marks at 1° increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45° . Tables with optional engraved marks every 1° have detents every 15° . The tension is adjustable for the positioning detents on the table top.

The table includes two one-minute sensitive levels on the table base for a more accurately leveled table surface. A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5° of tilt.

The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately.


FEATURES:

  • Small and lightweight for easy bench mounting and manual operation
  • Two degrees of freedom for tilting and rotating test instruments
  • Spring loaded detents provide accurate table top rotary indexing
  • Flat, precision ground table top mounting surface
  • Anodized aluminum construction for durable corrosion resistance
  • Sensitive bubble levels for accurate table leveling
  • Knurled mounting screws are available for easy instrument package mounting


IBC BRAND CLEANER M250
price: $85.80
part num: 13310
IBC™ Brand Cleaner 250 – 2.5mm connectors
Individual Cleaner Box Dimensions: 29 x 44 x 213mm
10pc. Carton Dimensions: 94 x 157 x 215mm
Shipping Weights: Individual = 68g Case = 762g

Compliant with EU/95/2002/EC Directive (RoHS)

SCORSBY MOTION TEST TABLE
price: $11,742.50
part num: 1421


Ideal Aerosmith's Remote Interface Model 1421
Scorsby Motion Test Table is designed to simulate
the roll, pitch, and yaw motions of an aircraft
during flight. Primarily used for inspection,
evaluation, qualification and/or calibration testing
of aircraft gyroscopic instruments and components.
The Ideal Aerosmith Scorsby table is a standard
in the aircraft industry.

The Model 1421 Scorsby Motion Test Table is designed to simulate the roll, pitch, and yaw motions of an aircraft during flight. Primarily used for shop, production, qualification testing, and exercising of gyroscopic aircraft instruments, the Ideal Aerosmith Scorsby table is a standard in the aircraft industry.

The Model 1421 is an enhanced version of the 1411E/1412E Series Scorsby Table. The Scorsby table can be operated through the front panel controls or the remote communications interface. The front panel consists of a power switch, LCD display, and four keys: run/menu, increase, decrease, and enter. Full computer controlled automation can be accomplished with an RS-232 (standard) or IEEE-488 (optional) interface.

The closed-loop motion control system consists of a DC servo gearmotor, a controller, and an optical encoder. The encoder is located on the high speed shaft of the gearmotor to provide high resolution feedback for smooth Scorsby motion with a constant frequency.

The pitch, roll and yaw motions are achieved with a single rotating shaft and Ideal Aerosmith's patented head design. The sinusoidal motion of each of the axes is related to the shaft motion and can not be controlled independently.


FEATURES:

  • Variable Speed from 1 to 10 Cycles/Minute
  • RS-232 Remote Communications Interface (IEEE-488 optional)
  • Table can find home position
  • LCD shows current speed, number of cycles, and shaft position (Mode dependent)
  • New easy to adjust tilting head with engraved markings
  • Positive stop allows quick setting of the tilt head to frequently used positions
  • Oscillation reversing with electronic cycle counter provides testing versatility from 1 to 9 cycles
  • Integral bubble level on table top and screws on base plate provide quick, easy leveling
  • Motor and drive train designed for reliability and long life
  • Small and lightweight for easy bench top mounting
  • Approved for many aircraft gyroscopic instrument tests
  • Anodized aluminum mounting platform for durable and corrosion resistance
  • Designed with ball bearings for smooth motion and long life
  • Flat, precision-ground table top mounting surface




INSTRUMENT CHAMBER/2 UNIT
price: $4,620.00
part num: 16-11-2
Pressure and Vacuum Instrument Test Chambers are designed for instrument and transducer calibration.

MODEL 16-11-2 DESCRIPTION:

The 16-11-2 test chamber is designed to test two instruments at a time. Complete with an aluminum alloy door and optional mounting brackets, this model is affordable and efficient. High precision Ideal Aerosmith valves regulate the vacuum, pressure, and vent flows. The Plexiglass viewing window and optional instrument mounting brackets provide clear vision of the instruments being tested. This chamber also has a vibrator to eliminate instrument friction.


MODEL 16-11-2 FEATURES\OPTIONS:

  • Two instrument test capacity
  • Durable aluminum casting for chamber
  • Aluminum alloy door
  • Chamber door is precision fit with adjustable hinges and "quick-acting" double safety latch
  • Heavy-duty Plexiglass viewing window
  • Front-mounted sensitive needle valves for accurate control of pressure, vacuum, and venting
  • Vibrator to eliminate instrument friction
  • MS type electrical connectors
  • Optional instrument mounting brackets can be built to your specifications.
  • Optional 230 Volt operation (50 or 60 Hz) is possible with the step-down transformer.


MODEL 16-13-8A DESCRIPTION:

The model 16-13-8A test chamber allows the operator to test up to eight instruments at one time. The welded steel construction assures a broad margin of strength and safety. High precision Ideal Aerosmith valves are incorporated to regulate vacuum, pressure, and vent flows. The chamber is complete with a vibrator to eliminate instrument friction, and a removable instrument mounting rack to facilitate faster instrument set up times. Instrument mounting brackets will be built to specifications or removed if desired. The door is a double access, positive-seal arrangement with safety features incorporated to prevent accidental opening while the chamber is pressurized or evacuated. This chamber includes interior lighting for better instrument readability.


MODEL 16-13-8A FEATURES\OPTIONS:

  • Eight instrument test capacity
  • Durable, all-welded construction
  • Safety valve to prevent over-pressurization
  • Positive-seal safety door
  • Heavy-duty Plexiglass viewing window
  • Interior lighting
  • Vibrator to eliminate instrument friction
  • MS type electrical connectors
  • Optional instrument mounting brackets can be built to your specifications.
  • Optional 230 Volt operation (50 or 60 Hz) is possible with the step-down transformer.


P/N: Description:
16-11-2 Instrument Test Chambers (tests up to two instruments)
16-13-8A Instrument Test Chambers (tests up to eight instruments)

TACHOMETER TESTER/3 UNIT
price: $13,200.00
part num: 17-53-3B/C


Ideal Aerosmith Inc. 17-53-3B/C (bench model) and the
18-53-4B/C (floor model) are Tachometer Testers for testing and calibration of electrical and mechanical tachometer generators and indicators.

DESCRIPTION:

For testing electrical and mechanical tachometer generators and indicators, the unit is engineered and designed to provide maximum efficiency and versatility.

The Ideal Aerosmith 17-53-3B/C (bench model) and the 18-53-4B/C (floor model) are both self contained and self-calibrating. The outside drives are provided with pad mounting flanges. An adapter changes the flanges to screw mounts. The front drives are normally used for driving the generators of the electrical tachometers. A flex shaft can be left on the inside drive for use with centrifugal or magnetic tachometers. Quick disconnect mounting clamps are provided for four tachometer indicators.

Operating speed at the rates and/or setting can be closely maintained even with a change in load. Speed can be preset if desired, and the drive will quickly accelerate to that speed when the start button is pressed. A control station on the panel includes start and stop push buttons, a reversing switch, and a ten-turn speed control potentiometer with vernier for fine adjustment of speed. The 18-53-4B/C tachometer tester is also provided with a roll out work tray.


FEATURES:

  • Manufactured to strict US Navy Department specifications
  • Quick disconnect instrument mounting clamps
  • Digital display comes with certification of trace ability to the National Institute of Standards and Technology
  • Model 17-53-3B/C can test up to three tachometers at one time
  • Model 18-53-4B/C can test up to four tachometers at one time



P/N: Description:
17-53-3B/C Tachometer Tester (bench model - tests up to 3 tachometers)
18-53-4B/C Tachometer Tester (floor model - tests up to 4 tachometers)

ADAPTER SOC SC 16 SERIES
price: $140.64
part num: 1662
Adapter SOC SC 16 Series.

VISUAL FAULT LOCATOR 635nm
price: $493.86
part num: 170XL
VISUAL FAULT LOCATOR 635nm
  • Locate breaks up to 3km away.
  • Continuous wave output mode for steady, accurate fault location.
  • Blinking diode makes fault location easier.
  • Simple to use quick interface fits all 2.5mm connector interfaces.
  • 1.0mW output power
  • Ergonomic style makes this item perfect for one-handed operation.
  • Rotary switch makes for very easy use.
  • Aluminum body is strong, lightweight and splash proof.


TACHOMETER TESTER RPM READOUT
price: $4,400.00
part num: 1790-230
This test instrument is used for testing and calibration of electrical and mechanical tachometer generators and indicators. A high quality DC motor is coupled directly to a 1/4 inch square hole drive (AN Pad). This tachometer tester output can be converted to a wide variety of adapters and different tachometer interfaces. The motor drive control circuit uses SCR components and an open loop system for an economical solution to speed adjustment. The control panel consists of a five digit LED display, momentary switches for start and stop, a direction switch, a display select switch, and a ten-turn potentiometer for speed adjustment.
  • 250-10,000 RPM Tachometer Testing Range
  • 250-5,000 RPM Actual Drive Speed
  • ± 1 RPM Accuracy of Digital Display
  • Bright Red 5 Digit Display
  • Maximum Torque: 60 oz-in
  • Low Cost
  • Direct Drive
  • Bi-directional
  • Ten-turn Speed Adjustment
  • Optional Calibration Kit Available

Drive Type: Permanent Magnet DC Motor
Maximum Torque: 60 oz-in.
Drive Outlet: ¼ inch Square Hole (AN Pad)
Shaft Speed Range: Infinitely variable within 250-5000 RPM Bi-directional
Indicator Speed Range:
  • (1X Setting): 250 -5000 RPM
  • (2X Setting): 500 - 10,000 RPM
Dimensions: 12.7W x 12.0L x 8.1H in. (323 x 305 x 206 mm)
Approximate Weight:
  • Standard: (115 VAC): 25 lbs. (11.5 Kg)
  • Optional: (230VAC): 36 lbs. (16 Kg)
Digital Display: 5 digit LED, quartz crystal controlled
  • Accuracy: ± 1 RPM
  • Units: RPM (Standard), Percentage (Optional)
  • Readout: (XXXXX) RPM or (XXX.X) Percent
Power Requirements:
  • IEC 60320 Power Entry Module
  • 115 VAC, 50/60 Hz (Standard)
  • 230 VAC, 50/60 Hz (Optional)
Operating Environment:
  • Temperature: 40º to 90º F (4º to 32º C)
  • Relative Humidity: 20% to 85% noncondensing


Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »