Parts   

Fields marked with are required to add

New Parts


FlightPath has access to thousands of aviation parts in all categories at discounted pricess.

Viewing items 1 - 20
AMPLIFIED ANTENNA SPLITTER
price: $990.00
part num: ALDCBS1X8
The ALDCBS1X8 GPS Amplified Splitter is a one input, eight output device with 13dB min. gain block. The frequency response covers GPS L1, L2 & GLONASS bands with excellent gain flatness. In the normal configuration, the splitter RF output (J1) passes DC from the connected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter amplifier. The other RF outputs (J2 - J8) are DC loaded with 200 Ohm resistors to simulate the antenna current draw.

AMPLIFIED ANTENNA SPLITTER
price: $385.00
part num: ALDCBS1X2
AMPLIFIED ANTENNA SPLITTER

ANT COUPLER/DUAL MARKER BEACON
price: $102.58
part num: AV-575
The AV-575 antenna is a marker beacon antenna splitter allowing two receivers to share the same antenna. It is a direct replacement for the CI 509.
Application:
Marker Beacon

Frequency:
75 MHz

Impedance:
50 Ohms Nominal

VSWR:
1.5:1 Maximum

Insertion Loss:
3.5 dB Maximum

Isolation:
20 dB Minimum

Connector:
"BNC" Female

Weight:
0.20 lbs

RF Power Capacity:
Receive Only

FAA TSO:
C35d

Color:
Gloss Black

ANTENNA COUPLER/DUAL VOR/DUAL GLIDESLOPE/108-118MHz/328-336 MHz
price: $148.78
part num: AV-585
Dual VOR/Dual GS diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/GS antenna.

Frequencies Covered
  • 108-118 MHz & 329-335 MHz


ANTENNA COUPLER
price: $218.68
part num: CI-5120
Splits VOR/LOC/GS signal into 2 equal outputs of VOR/LOC/GS.
Designed for use with Garmin GNS 580 and similar systems. The CI 5120 splits single coax antenna input into equally proportioned VOR/LOC/GS outputs, allowing you to run two single input receivers off of one antenna.
MODEL - CI 5120
Electrical
Frequency: 108-118 MHz & 329-335 MHz
VSWR: 1.5:1 Maximum
Isolation: 20 dB Minimum
Insertion Loss: 1.0 dB Maximum
Impedence: 50 Ohms
Aplitude Balance: +/- .50dB
Phase: +/- 180 degrees +/- 5 degrees
Power Split: 3 dB
Mechanical
Weight: 0.1 lbs
Height: 0.97 inches
Material: Aluminum
Finish: Alumium
Connector: BNC (Female)
Environmental
N/A: Internal Mounting

ANTENNA COUPLER
price: $471.52
part num: GSNC20-05

AMPLIFIED SPLITTER
price: $495.00
part num: NALDCBS1X2

RF POWER DIVIDER
price: $339.90
part num: SSPD113-39
Equal-Power Divider for Marker Beacon applications. The SSPD-113-39 Power Divider allows a single Marker Beacon antenna to be connected to two separate Marker Beacon receivers.
Frequency:
75 MHz

VSWR:
1.5 : 1 max.

Insertion Loss:
.5 dB max.

Isolation:
20 dB min.

Weight:
3 oz.

Height:
.75 in.

Width:
1.75 in.

Material:
Tin-plated

Finish:
Skydrol resistant polyurethane Enamel, color flat grey

Connector:
Typ “BNC” 3 Plc’s

Temperature:
-65°F to +185°F

Shock:
10 G’s

Vibration:
15 G’s

Attitude:
Sea Level to 60,000 ft.

Pre-Owned Parts Inventory


FlightPath maintains an inventory of pre-owned avionics as a result of upgrades and 20+ years of accumulation.
If you don't see what you are looking for, try our RFQ form and we will get back to you with a quote.

Click to Enlarge
BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »

Promotions


As a result of our partnerships with various manufacturers we frequently receive special promotions that we pass on to our customers.

Promotion: Mid-Continent MD-302
Price: $10,295.00
Desc:
Promotion: ASPEN 1000 PRO
Price: $10,295.00
Desc: get your aspen installed out the door most aircraft for 10295.00

Part Request Form Fields marked with are required to add


  352-796-1663   ai: KBKV

Mid-Continent MD-302

View Promotion Details »

ASPEN 1000 PRO

View Promotion Details »

BENDIX/KING RDS-86 RADAR SYSTEM

View Item Details »